Application:
This model is suitable for all kinds of standard heat polishing, conical head polishing, spherical head polishing, torispherical head polishing, pressure head polishing, deformed head polishing, stainless steel elliptical head polishing, pressure vessel head polishing and stainless steel sealing head
inside & outside polishing. The head polishing machine is extensive apply for the polishing of work piece in the range of medical, chemical, environmental purification, food and beverage, water filtration, etc.
Model JT-2 Data:
1. Polishing Work Piece Size: Outside & Inside diameter at 400~5000mm
2. Polishing Precision: Surface roughness (Ra) is less than 0.25μm
3. Production Efficiency: 6 to 12 Square meters per hour.
4. Suitable Polishing Material: Impeller, Cloth emery wheel, Hemp wheel and Nylon wheel.
5. Outer Dimension(L x W x H): 3500 X 1500 X 3080mm
6. Input Total Power: 5KW
7. Machine Weight: 2200KGS
Product Features:
1. The machine makes surface friction through the contact of polishing wheel and the work piece
then to polish the head surface inside and outside, and grind weld surface. and improve the surface smoothness of the work piece.
2. According to head inside surface curve, it can be divided into three sections curve: subsection,
time-sharing and different speed. The running time of the beam can be adjusted directly in the
control cabinet with three time-controllers. The running speed of the up and upon of beam is
set in the corresponding frequency speed controller. The running track of grinding head and head
surface consistent when the machine is polishing. According to the grinding head floating
technology, The grinding head close to the work piece’s surface to grind uniformly when the
machine is polishing, it is suitable for lots of work pieces polishing.
3. The Beam walks from the scheduled direction. The walking speed of beam from up to down and
from left to right both according to the actual data in the panel. According to the grinding head
floating technology, The grinding head close to the work piece’s surface to grind uniformly when
the machine is polishing, it is suitable for a small amount of work piece polishing.
4. The rotary speed of the work piece and grinding head can be adjustable in using of frequency
controller of the stepless speed regulator then to improve polishing effect and increase the work
efficiency.